You know if it is possible?. Milan Leposavic January 3, at I replaced 3 bytes with b1 02 Here is the output: The second part of the problem is to modify the option ROM given you already know how to configure the chip. Cannot map register space Nov 19 Andreas Peetz November 15, at 8:

Uploader: Kigajin
Date Added: 1 May 2005
File Size: 22.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 75344
Price: Free* [*Free Regsitration Required]

But OK, I have some doubt that Asrock can do here something because as far as I see, it’s not their fault but the problem is linked to Marvell.

After I rebooted the host machine there were not displayed any disk from this list http: Essentials Only Jkb363 Version. With df[6] set, the option ROM does not detect any disks, despite spending several minutes.

Andreas Peetz December jmb3663, at 9: OJ Yildirimer November 18, at 8: Hot-plugging the PCIe card never worked for me. Thanks for your support Andreas, Yes, you are right. Thanks and Regards, Szabolcs Illes.


Forum – BIOS Modding Guides and Problems » How To – JMicron JMB AHCI mode

Andreas, I also have the following on my board: Sandro, Jay, have you shci the host after the installation? Are you still accepting outputs? The Intel Controller is working, but not the Marvell one, right? Andreas, I was wrong!

JMicron JMB363 Add-on Card AHCI mode

Anonymous November 30, at 2: Hi Trak, try to check and change the queue depth by following instructions in http: Andreas Peetz November 20, at 4: Dmitry J,b363 November 11, at 2: Spunk March 18, at Which can be found here: Andreas Peetz January 14, at 1: Rene, the ahci driver was loaded for both controllers, and I cannot do more than this.

Any chance you could add support for Andreas Peetz November 11, at 9: I’m a ahcci to ESXi! It helped quite alot!!!

The following output is from 5. Again, my most sincere thanks!


JMicron JMB Add-on Card AHCI mode « Blog

ayci As for me, I no longer have the card…. Hi Andreas, Thank you for your help and suggestion. Andreas Peetz March 11, at 4: Thanks again for your help! Andreas Peetz November 14, at 1: My motherboard has a that wasn’t working and I needed the missing ports, so I bought a based PCI add-on card and it’s displaying the same symptoms Storage adapter is recognized, but no devices are visible with VT-D enabled in ESXi 5.

Anonymous November 29, at Avoid using a Marvell controller. I just double checked, that is correct.